Nissan Primera

1990-1992 of release

Repair and car operation



Nissan Primera
+ Nissan Primera brand Cars
+ Current leaving and service
+ Engine
+ cooling and heating Systems
+ the Power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Manual transmission, differential and main transfer
+ Automatic transmission
- Coupling and power shafts
   - Coupling
      General information
      Coupling check in the established condition
      Coupling removal
      Coupling repair
      Coupling installation
      Coupling adjustment
      Switching off mechanism
      Malfunctions of coupling
      The directing bearing of a shaft of coupling
      Flywheel
   + Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Appendices


3246bbf9



The directing bearing of a shaft of coupling

The directing bearing on inside of a flywheel can be checked in the established condition, having entered a forefinger into the bearing and повращав it here and there, moving it thus forward-back.

If there are places of jammings or excessive люфт, it is possible to replace the bearing. For a vynimaniye of the bearing it is best of all to use a hammer with sliding the brisk. The flywheel can be thus established or removed. Establish a suitable adapter under an internal holder of the bearing and establish on an adapter a hammer with sliding the brisk. Beat out the bearing. Hammer the new bearing into a flywheel while it will not be level with outer side of a flywheel.