Nissan Primera

1990-1992 of release

Repair and car operation

Nissan Primera
+ Nissan Primera brand Cars
+ Current leaving and service
+ Engine
+ cooling and heating Systems
+ the Power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Manual transmission, differential and main transfer
+ Automatic transmission
- Coupling and power shafts
   - Coupling
      General information
      Coupling check in the established condition
      Coupling removal
      Coupling repair
      Coupling installation
      Coupling adjustment
      Switching off mechanism
      Malfunctions of coupling
      The directing bearing of a shaft of coupling
   + Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Appendices


Coupling removal

Coupling can be removed only after removal of all unit and the subsequent detachment of the engine or after separate removal of a transmission.


  1. Remove the engine or a transmission (Head the Engine or the Manual transmission, differential and the main transfer).
  2. Mark the provision of coupling concerning a flywheel. For this purpose use a center punch which marks in a cover of coupling and a flywheel become.
  3. Evenly weaken coupling bolts in the sequence shown on an illustration, spring loading will not be removed yet.
Sequence of weakening of bolts of coupling. To tighten bolts in return sequence.
  1. Uncover couplings and take out a conducted disk.
  2. At once wipe a rag inside of a flywheel and check a frictional surface of a flywheel. If the conducted disk is worn-out to heads of rivets, maybe, that rivets ran into a flywheel. If it is required, replace a flywheel as it is described in the corresponding chapter.
  3. At engine and transmission removal coupling always unscrews, so it can be checked. Coupling replacement during this moment saves cares in the future. Also check vyzhimny the bearing.