1990-1992 of release
Repair and car operation
+ Nissan Primera brand Cars
+ Current leaving and service
+ cooling and heating Systems
+ the Power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Manual transmission, differential and main transfer
+ Automatic transmission
- Coupling and power shafts
Coupling check in the established condition
Switching off mechanism
Malfunctions of coupling
The directing bearing of a shaft of coupling
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Onboard electric equipment
If coupling acts in film, it is necessary to check a flywheel and a teeth of its gear wreath. As the gear wreath separately is not replaced, it is necessary to replace all flywheel. If the frictional surface looks well, it should be processed well an emery paper. Remove thus small, visible traces of a deposit.
Before again screwing a flywheel, it is necessary to check its palpation. It becomes by means of the tsiferblatny indicator, as is shown in an illustration.
At slow rotation of a flywheel of the shooter of the indicator should not move more than on 0.2 mm. Otherwise, the flywheel should be replaced, as the deformed frictional surface makes negative impact on coupling work. At the order of a new flywheel surely specify engine capacity as not on all models identical flywheels are established. Evenly tighten flywheel bolts with effort of 83-93 N • m.