Nissan Primera

1990-1992 of release

Repair and car operation



Nissan Primera
+ Nissan Primera brand Cars
- Current leaving and service
   - Schedule of routine maintenance
      Introduction
      Current leaving
      General information on control
      Check of levels of liquids
      Check of a condition of tires and pressure in them
      Replacement of impellent oil and oil filter
      Check of level of liquid of system of hydrostrengthening of a wheel
      Check of level of liquid of automatic transmission
      Rotation of wheels
      Check of a condition and replacement of hoses of an impellent compartment
      Condition check, adjustment of a tension and replacement of driving belts
      Check and adjustment of turns of idling of the engine and level WITH
      Check of a condition of the battery, care of it and charging
      Check and replacement of spark plugs
      Check and replacement of candle VV of wires, covers and distributor begunka
      Check of level of oil in a manual box of gear shifting
      Check and adjustment of gaps of valves
      Check and greasing of draft of a drive of a butterfly valve
      Replacement of an element of the air filter
      Check of fuel system
      Check of functioning of system of cooling
      Check of a condition of system of production of the fulfilled gases
      Check of a condition of components of a suspension bracket and steering
      Check of a condition of protective covers of power shafts
      Check of brake system
      Check of a condition and replacement of brushes of screen wipers
      Replacement of transmission liquid
      Plums, washing and filling of system of cooling
      Replacement of the fuel filter
      Replacement of transmission oil of manual transmission
+ Engine
+ cooling and heating Systems
+ the Power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Manual transmission, differential and main transfer
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Appendices


3246bbf9

Check of levels of liquids

Weekly or through each 400 km of run (that will come earlier)

Below procedures of check of level the liquids made through each 400 km of run or weekly are described. The description of other checks of levels of liquid can be found further in the Sections devoted to specific procedures of service. Irrespective of check intervals according to the schedule do not allow, that liquid followed under the car, such leaks indicate malfunction which it is necessary to eliminate immediately.

Liquids are the integral component of systems of greasing, cooling, brake and systems of washing of a windscreen. In view of a gradual expense and/or pollution of liquids in the course of normal operation of the car, it is necessary to replace them periodically. Familiarize with the Section Types and volumes of applied greasings and liquids in Specifications before starting to доливу liquids in any of the listed components.

At any check of level of liquid the car should stand on an equal surface.

Impellent oil

Check of level of impellent oil is made by means of measuring щупа, the engine located on one side. Shchup passes through a metal tube down, reaching a bottom of the pallet of a case of the engine.

Measurement of level of impellent oil is made before start of the engine or not less than through 15 mines after its switching off.

If to start measurement of level of impellent oil right after engine switching off, the part of oil remains in the top part of the engine that will essentially be reflected in accuracy of indications щупа.


 PERFORMANCE ORDER

  1. Take щуп and dry wipe its edge pure rags or a paper towel. Enter щуп up to the end back and again take it. The height of the site of an edge moistened with oil will correspond to oil level in the engine. This level should be in corrugated area on щупе (see an illustration).
Level of oil should remain between two labels, it is desirable at level or is close from top of them - if it not so, add oil to the top label.
  1. For lifting of level of oil from the minimum label on щупе to maximum one liter of oil is required. Do not allow level falling below the minimum label since oil starvation can lead to engine damage. On the other hand, engine overflow by oil (having added above the maximum mark) can be at the bottom of a zamaslivaniye of spark plugs, leakages of oil or failure of epiploons.
  2. To add oils, unscrew a cover of a mouth of the gulf, located on a cover of a head of cylinders. After долива some oil wait some minutes that level of oil was stabilized, then pull out щуп and again check level. If it is required, add still oils. Close a cover of a mouth and tighten her hand.
The cover of a mouth of the gulf of oil is located in a cover of a head of cylinders - each time before opening it, be convinced that a surface round a mouth the pure.
Having added impellent oil.
  1. Check of level of oil is important preventive procedure. Continuous falling of level of oil indicates or existence of its leaks through the damaged epiploons or weakened connections, or on its burning out (internal leaks through worn-out piston rings or via directing plugs of valves). Besides, it is necessary to pay attention and to a condition of the oil. If oil has dairy color or in its structure it is possible to notice water drops, it indicates possible violation of tightness of laying of a head of cylinders or crack existence in a head or the block of cylinders. In this case the engine should be repaired immediately. Each time at measurement of level of oil before edge rubbing щупа carry out on it big and index hand fingers. If will be thus found stuck on щуп particles of dirt or metal particles, oil it is necessary to replace (see. Section Replacement of impellent oil and oil filter).

Engine cooler

Do not allow antifreeze hit on your skin or on the painted surfaces of the car. If it nevertheless occurred, immediately wash away antifreeze a plentiful quantity of water. Antifreeze is extremely toxic in a case hit in an organism. Never leave it without supervision in the open container or spilled on a floor; or animals its sweet smell can involve children and they can drink it. Agree with local authorities about destruction of the used antifreeze.

All cars considered in this Management, are equipped with cooling system with superfluous pressure of compensatory type. The white plastic broad tank (or the cooler tank) is located in an impellent compartment and connected by a hose to a radiator. In process of an engine warming up in the course of its work the extending cooler fills a tank. When cooling engine the cooler automatically arrives back in cooling system that provides maintenance of constant value of its level.

Check of level of a cooler in the tank should be made regularly. Add 40 %/60 %-nuyu an antifreeze mix on a basis этиленгликоля with water.

 PERFORMANCE ORDER

  1. Uncover and add a cooler.
Having added antifreeze mixes.

Do not uncover a jellied mouth of a broad tank or a radiator cover for check of level of a cooler before complete cooling of the engine! Level in the tank fluctuates depending on engine temperature. When the engine cold, level of a cooler should be higher than "LOW" label on the tank. In process of engine heating level should come nearer to "FULL" label. If it not so, let's to the engine cool down and then uncover the tank.

  1. Banish the car and again measure cooler level. If to the necessary level it is required to add only small amount of a cooler, for this purpose it is possible to use pure water. However frequent additions of water will dilute antifreeze. To provide a normal ratio of antifreeze and water, always add to the necessary level a demanded mix.
  2. If level of a cooler falls regularly, in system leak existence is possible. Examine a radiator, hoses, a cover of a mouth, a stopper plum and the water pump (see. Section Plums, washing and filling of system of cooling). If any leaks it is not revealed, make check of tightness of a cover of a broad tank and a radiator in dealer office of the NISSAN service.
  3. If you need to uncover, wait, while the engine completely will cool down, then wrap up a piece of thick rags round a cover of t unscrew it to the first emphasis. If thus from under a cover steam or a cooler starts to escape, let's to the engine cool down a little more, and only then uncover.
  4. It is necessary to check a cooler condition also. It should be rather pure. If liquid has brown or rusty color, it it is necessary to merge, wash out system and to fill it with a new mix. Even if the cooler looks normally, inhibitors of corrosion entering into its structure lose over time the efficiency therefore it is necessary to replace it through certain periods.

Brake liquid

Brake liquid can harm your eyes and damage the painted surfaces of the car therefore be extremely careful at the treatment of her. Do not use brake liquid which long time stood opened or to which is more than one has some. Brake liquid has property to absorb moisture from air that can lead to dangerous loss of efficiency of brake system. Use only the recommended type of brake liquid. Mixing of various types of liquid (such as and DOT 5) can lead DOT 3 or 4 to refusal of brake system.

The main cylinder of brake system is established in a back left corner of an impellent compartment.

Level of brake liquid is checked visually, on labels on the plastic tank established on the main cylinder. Level of liquid should be between labels "MOVE" and "MIN". If level is lower admissible, at first wipe top of the tank and a cover pure rags to prevent dirt hit in system after cover removal. Add to the necessary level the recommended liquid, but do not pour.

Level of brake liquid should remain above "MIN" label on the translucent tank - uncover and add liquid.

 PERFORMANCE ORDER

  1. While the tank cover is removed, check liquid and the tank of the main cylinder on existence of pollution. If at it there are particles of a rust, dirt or a water drop, liquid from system it is necessary to merge and fill in the new.
  2. After долива the tank to the necessary level make sure that the cover is established exactly, in order to avoid leakages of liquid and/or dirt hit.
  3. Liquid level in the main cylinder will fall slightly as a result of wear process of frictional overlays of brake shoes. There is no need to add it until level remains near "MIN" label; it will rise after replacement of slips. Very low level can indicate wear of brake shoes. Check them on wear existence (see. Section Check of brake system).
  4. If level of brake liquid constantly falls, immediately check all system on existence of leaks. Survey brake lines, hoses and shtutserny connections, together with supports, wheel cylinders and the main cylinder (see. Section Check of brake system).
  5. If at check of level of liquid one or both of the tank will appear empty or nearly empty, the brake system should be checked on existence of leaks and is pumped over (see. Head Rotation of wheels).

Liquid of a washer of a windscreen

Liquid for washing of a windscreen is in the plastic tank in an impellent compartment.

Dolivaniye of liquid in the tank of a washer of a windscreen

In areas with a temperate climate it is possible to fill system with usual water, but the tank should be filled no more, than on two thirds that there was a free space on a case of expansion of water when freezing. In areas with cold climatic conditions it is necessary to use special antifreeze for system of washing of the windscreen, reducing a freezing point of liquid which can be got in any shop of automobile accessories. Usually it is on sale in the concentrated or ready look. If you got the concentrated antifreeze, mix it with water according to the instruction of the producer on packing.

Do not use antifreeze of system of cooling - it will damage the painted surfaces of the car.