Nissan Primera

1990-1992 of release

Repair and car operation

Nissan Primera
+ Nissan Primera brand Cars
- Current leaving and service
   - Schedule of routine maintenance
      Current leaving
      General information on control
      Check of levels of liquids
      Check of a condition of tires and pressure in them
      Replacement of impellent oil and oil filter
      Check of level of liquid of system of hydrostrengthening of a wheel
      Check of level of liquid of automatic transmission
      Rotation of wheels
      Check of a condition and replacement of hoses of an impellent compartment
      Condition check, adjustment of a tension and replacement of driving belts
      Check and adjustment of turns of idling of the engine and level WITH
      Check of a condition of the battery, care of it and charging
      Check and replacement of spark plugs
      Check and replacement of candle VV of wires, covers and distributor begunka
      Check of level of oil in a manual box of gear shifting
      Check and adjustment of gaps of valves
      Check and greasing of draft of a drive of a butterfly valve
      Replacement of an element of the air filter
      Check of fuel system
      Check of functioning of system of cooling
      Check of a condition of system of production of the fulfilled gases
      Check of a condition of components of a suspension bracket and steering
      Check of a condition of protective covers of power shafts
      Check of brake system
      Check of a condition and replacement of brushes of screen wipers
      Replacement of transmission liquid
      Plums, washing and filling of system of cooling
      Replacement of the fuel filter
      Replacement of transmission oil of manual transmission
+ Engine
+ cooling and heating Systems
+ the Power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Manual transmission, differential and main transfer
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Appendices


Check of a condition and replacement of brushes of screen wipers

Annually or each 20000 km of run

On brushes of screen wipers the road film over time collects, reducing efficiency of their work therefore brushes should be washed out regularly in soft cleaning solution.


Assemblies of screen wipers with brushes should look round regularly. If survey revealed existence of hardenings or cracks on rubber of brushes, replace brushes. If at survey it is not revealed anything unusual, wet a windscreen, include screen wipers, let's to them work a little and switch off them. A non-uniform trace from brushes on glass or strips on pure glass specify that it is necessary to replace brushes.

During operation of the mechanism of screen wipers there can be a weakening of fixing nuts therefore they should be checked and if necessary to tighten each time at check of brushes (see. Head Onboard electric equipment for more detailed information on operation of the mechanism of screen wipers).

Replacement of brushes of screen wipers


  1. Delay screen wiper assembly with a brush from glass.
  2. Press a fixing uvula inside and remove brush assembly from the screen wiper lever.
  1. Press inside a fixing uvula, then pull together assembly of a brush of a screen wiper down and outside from a hook on the end of the lever of a screen wiper.
  1. If you want to replace only rubber of brushes, disconnect the brush end from a brush frame, then pull out a brush from a frame.
  1. Disconnect the end of an element of a screen wiper from the frame end, then remove an element.
  1. Compare a new brush with old on length, a design etc.
  2. Establish a new brush into place, then insert its end into a brush frame to fix it.
  3. Establish brush assembly on the lever, then moisten glass and check screen wiper work.