Nissan Primera

1990-1992 of release

Repair and car operation



Nissan Primera
+ Nissan Primera brand Cars
- Current leaving and service
   - Schedule of routine maintenance
      Introduction
      Current leaving
      General information on control
      Check of levels of liquids
      Check of a condition of tires and pressure in them
      Replacement of impellent oil and oil filter
      Check of level of liquid of system of hydrostrengthening of a wheel
      Check of level of liquid of automatic transmission
      Rotation of wheels
      Check of a condition and replacement of hoses of an impellent compartment
      Condition check, adjustment of a tension and replacement of driving belts
      Check and adjustment of turns of idling of the engine and level WITH
      Check of a condition of the battery, care of it and charging
      Check and replacement of spark plugs
      Check and replacement of candle VV of wires, covers and distributor begunka
      Check of level of oil in a manual box of gear shifting
      Check and adjustment of gaps of valves
      Check and greasing of draft of a drive of a butterfly valve
      Replacement of an element of the air filter
      Check of fuel system
      Check of functioning of system of cooling
      Check of a condition of system of production of the fulfilled gases
      Check of a condition of components of a suspension bracket and steering
      Check of a condition of protective covers of power shafts
      Check of brake system
      Check of a condition and replacement of brushes of screen wipers
      Replacement of transmission liquid
      Plums, washing and filling of system of cooling
      Replacement of the fuel filter
      Replacement of transmission oil of manual transmission
+ Engine
+ cooling and heating Systems
+ the Power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Manual transmission, differential and main transfer
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Appendices


3246bbf9

Check of a condition of system of production of the fulfilled gases

Annually or each 20000 km of run

Check should be made at the cold engine therefore it is better to be engaged in it before the first trip for the present day or not earlier than in three hours after engine switching off. Check a condition of all system of release, beginning from the engine and finishing a cut of an exhaust pipe. In an ideal this check should be carried out at the car lifted on the winch when from below to it there is a free access. If the winch is inaccessible, поддомкратьте the car and reliably establish it on support.

 PERFORMANCE ORDER

  1. Check pipes and trumpet connections on existence of signs of leaks, strong corrosion and damages. Check a condition and reliability of fastening of all brackets and подвесов systems.
  1. Examine rubber подвесы systems of production of the fulfilled gases on existence of cracks.
  1. At the same time examine the car bottom on existence of holes, the corrosion, the dispersed seams and the other defects allowing penetration of fulfilled gases in salon of the car. Close up all openings suitable hermetic.
  2. Release system, especially its support and подвесы, often are a source of a roar and other unpleasant sounds. Shake and; pull pipes, exhaust silencers and the catalytic converter (if it is provided). If these components adjoin to elements of a body or suspension bracket details, replace fixture of system of release.
  3. Survey of an internal surface of an exhaust pipe allows to define the current working state of the engine. The structure of deposits in a pipe speaks about quality of settings of the engine. If the pipe from within black and smoked, it can indicate that it is necessary to check fuel system carefully.