Nissan Primera

1990-1992 of release

Repair and car operation



Nissan Primera
+ Nissan Primera brand Cars
+ Current leaving and service
+ Engine
+ cooling and heating Systems
+ the Power supply system and production of the fulfilled gases
+ System of electric equipment of the engine
+ Manual transmission, differential and main transfer
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   + Forward suspension bracket
   + Back suspension bracket
   + the Steering without the hydraulic booster
   - Steering with the hydraulic booster (servoupravleniye)
      General information
      Removal and servoupravleniye installation
      Replacement of cuffs of the steering mechanism
+ Body
+ Onboard electric equipment
+ Appendices


3246bbf9



Replacement of cuffs of the steering mechanism

Replacement of a cuff can be executed on the established mechanism.

 PERFORMANCE ORDER

  1. Lift a forward part of the car and unscrew a wheel.
  2. Disconnect the sharovy hinge of steering draft from the steering lever.
  3. Weaken a lock-nut near a tip of steering draft and unscrew a tip, having counted thus number of turns completely to remove a tip.
  4. Weaken tightening collars on inside of steering draft and a small collar on outer side and remove a cuff.
  5. Put on a new cuff and fix inside.
  6. Screw a tip of steering draft on draft on the same quantity of turns, as at removal.
  7. Attach a tip of steering bent for to the lever of a steering and tighten a koronchaty nut with effort of 37-46 N • m. Insert new шплинт.
  8. After installation check and, if necessary adjust a convergence of wheels.